product
GV600 Series (2G, 3G)
The GV600 series includes three models of ruggedized waterproof GNSS trackers specially designed for trailer, tanker, reefer and flatbed truck tracking. They include up to a 120-day standby time using an internal rechargeable 5800 mAh battery pack, and support dual external power sources for redundancy.
-
Ruggedized, designed for use in harsh heavy trucking environments, sealed against common fuel oils and other hazardous chemicals
-
Multiple I/O interfaces for monitoring and controlling including composite inputs, ignition detection and serial port options
-
1-wire interface temperature sensors monitoring
-
Low power consumption, 120-day long standby time with internal battery pack
-
Waterproof IP67 compliant
GV600W Product Series
| Model No. | Region | Technology | Certificate |
| GV608 | Worldwide |
GSM 850/900/1800/1900 MHz |
CE/E-Mark |
| GV628W |
North America |
UMTS/HSPA 850/1900 MHz GSM 850/1900 MHz |
FCC/PTCRB/ AT&T
|
| GV648W | Worldwide |
UMTS/HSPA 850/900/1900/2100 MHz GSM 850/900/1800/1900 MHz |
GSM Specifications
|
MODEL ITEM |
GV608 |
GV648W |
GV628W
|
|
|
Operating Band |
850/900/1800/1900 MHz |
850/1900 MHz |
||
|
Data Transmission |
GPRS multi-slot class 10 |
GPRS multi-slot class 33 EDGE multi-slot class 33 |
GPRS multi-slot class 12 EDGE multi-slot class RX |
|
UMTS/HSPA Specifications
|
MODEL ITEM |
GV628W |
GV648W |
|
Operating Band |
850/1900 MHz |
850/900/1900/2100 MHz |
|
HSPA Data Rate |
5.6Mbps upload/ 7.2Mbps download |
|
|
HSPA Fallback |
EDGE/GPRS/GSM quad band, EDGE MCS1-MCS9, 3GPP Release 6 |
|
GNSS Specifications
|
GNSS Type |
u-blox All-in-One GNSS receiver |
||
|
Sensitivity |
Cold Start: -147 dBm Hot start: -156 dBm Reacquisition: -160 dBm Tracking: -162 dBm |
||
|
Position Accuracy (CEP50) |
Autonomous: < 2.5m |
||
|
TTFF (Open Sky) |
Cold start: 27s average Warm start: 27s average Hot start: 1s average |
||
Interfaces
|
Digital Inputs |
1 positive trigger input for ignition detection |
|
Analog Input |
1 analog input (0V-32V) |
|
1-wire Interface |
Support 1-wire temperature sensor (maximum 8 channels) |
|
Power Output |
3.3V output for external devices |
|
Digital Inputs/Outputs |
4 negative trigger inputs for normal use, or 4 open drain outputs 150mA max drive current |
|
Serial Ports |
1 TTL port 1 RS232 port |
|
Cellular Antenna |
One TTL port, one RS232 port |
|
Cellular Antenna |
Internal only |
|
GNSS Antenna |
Internal only |
|
LED Indicators |
CEL, GNSS, PWR |
|
Connector |
18 pin waterproof connector |
General Specifications
|
Dimensions |
135mm(L) x 62mm(W) x 38mm(H) |
|
Weight |
270g |
|
Operating Voltage |
8V to 32V DC |
|
Internal Battery |
Two options: Li-ion, 3.7V, 5200 mAh, 18650 battery pack Li-ion, 3.7V, 5800 mAh, 18650 battery pack |
|
Standby Time |
120-day standby time with 15 minutes online and position reported once per day, 5800mAh battery |
|
Waterproof |
IP67 Compliant |
|
Operating Temperature |
-20℃~+60℃ |
| Charging Temperature |
0℃~+45℃ (For 5200 mAh battery); +10℃~+45℃ (For 5800 mAh battery) |
Air Interface Protocol
|
Transmit Protocol |
TCP, UDP, SMS |
|
Scheduled Report |
Report position and status based on preset time intervals, distance, mileage or a combination of these settings |
|
Geo-fences |
Geo-fence alarm and parking alarm, support up to 20 circular and 20 polygon geo-fence regions |
|
Low Power Alarm |
Alarm when backup battery is almost exhausted |
|
Power On Report |
Report when the device is powered on |
|
Special Alarm |
Special alarm based on digital/analog inputs, preset speed and internal 3-axis accelerometer |
|
Remote Control |
OTA control of digital outputs |
