LTE Cat M1/NB1 Trailer Tracker
Product Description: 

The GV600 series (LTE) includes three ruggedized waterproof GNSS trackers specially designed for trailer, tanker, reefer and flatbed truck tracking. The series supports LTE Cat M1/NB1 network on multiple bands for operation in America, Europe, and Oceania with a fallback to GPRS. All models within the series include up to a 120-day standby time using an internal rechargeable 5800 mAh bettery pack, and support dual external power sources for redundancy.


  • Wide Operating Voltage Range 8V to 32V DC
  • IP67 Compliant Waterproof

  • Ruggedized Case
  • Multiple I/O Interfaces for Monitoring and Control 
  • 1-Wire Interface Supporting Temperature Sensor 
  • 1 RS232 Port for External Accessory 
  • Dual Power Connector 
  • Support BLE 4.2

GV600 LTE Product Series

  Region Network/Operating Band GNSS Type Certificate
GV600MA North America


LTE B2/B4/B5/B12/B13

U-Blox All-in-One Receiver FCC/Verizon
GV600ME Europe


LTE B3/B8/B20

EGPRS 850/900/1800/1900 MHz

U-Blox All-in-One Receiver  


and Brazil


LTE B3/B28

EGPRS 850/900/1800/1900 MHz

U-Blox All-in-One Receiver  



GSM Specifications (GV600ME, GV600MB)

Frequency 850/900/1800/1900 MHz
GSM Feature

GPRS multi-slot class 33 (33 by default)

EDGE multi-slot class 33 (33 by default)

LTE Specifications



Operating Band B2/B4/B5/B12/B13 B3/B8/B20 B3/B28
Data Transmission

eMTC (DL) 375 Kbps

eMTC (UL) 375 Kbps

NB1 (DL) 32 Kbps

NB1 (UL) 70 Kbps

GNSS Specifications

GNSS Type u-blox All-in-One GNSS receiver

Autonomous: -147 dBm

Hot start: -156 dBm

Reacquisition: -160 dBm

Tracking: -162 dBm

Position Accuracy (CEP) Autonomous: < 2.5m
TTFF (Open Sky)

Cold start: 27s average

Warm start: 27s average

Hot start: 1s average


Digital Input

1 positive trigger input for ignition detection

Analog Input 1 analog input (0V-32V)
1-wire Interface Support 1-wire temperature sensor (maximum 8 channels)
Power Output 1 power output (3.3V) for external devices 
Digital Inputs/Outputs

4 negative trigger inputs for normal use, or

4 open drain outputs 150mA max drive current

Serial Port 1 RS232 port
Cellular Antenna Internal only
GNSS Antenna Internal only
BLE Antenna Internal only
LED Indicators CEL, GNSS, PWR
Connector 18 pin waterproof connector

General Specifications

Dimensions 138mm(L) x 66mm(W) x 38mm(H)
Weight 320g
Backup Battery Li-ion, 3.7V, 5800 mAh, 18650 battery pack
Internal G-sensor Used for speed alarm and motion alarm
Standby Time 120 days, report one location and online 15 minutes per day
Waterproof IP67 compliant
Operating Voltage DC 8V to 32V
Operating Temperature


-40℃ ~+85℃ for storage

BLE Support BLE 4.2 protocol

Air Interface Protocol

Transmit Protocol TCP, UDP, SMS
Scheduled Report Report position and status based on preset time intervals, distance, mileage or a combination of these settings
Geo-fences Geo-fence alarm, support up to 20 circular and 20 polygon geo-fence regions
Low Power Alarm Alarm when backup battery is almost exhausted
Power On Report Report when the device is powered on
Special Alarm Special alarm based on digital/analog inputs, preset speed and internal 3-axis accelerometer
Remote Control OTA control of digital outputs